Product Name: 8CH FHD AHD MDVR
Product Model: HDVR9808F
| Model | HDVR9808F | |
| System | Operating System | Linux 3.18.20 |
| Start up Time | <20 s (From Powered on to start recording) | |
| Operator Interface | English / Simplified Chinese/Russian | |
| Storage | 2.5” Hard Disk(up to 6TB), SSD(up to 2TB) or SD Card (up to 128GB) | |
| UI | GUI | |
| Video System | support 1080p30 recording | |
| Video | Video Input | Maximum for 8x 1080p Analog/AHD cameras |
| Video output | 2 Video Output (1 HDMI output, 1 CVBS output, HDMI is optional) | |
| Preview | Support FullScreen/Dual View/Quad View/6 Cameras view/8 Cameras view/9 Cameras view/10 Cameras view/12 Cameras view | |
| Standard Stream | ISO 14496-10 | |
| Recording Resolution | Support 1920x1080/1280x720/960x540(According to the type of camera) | |
| Recording | Supports normal, schedule, alarm recording and continuous | |
| Record File | AVI file, record video and audio at same time | |
| Bitrate | 100～8000 kbps for each camera | |
| Max fps (total) | 160fps@1080P for H.264 analog camera | |
| Audio | Audio Input | 8 audio input(built in the camera) |
| Audio compression | PCM(According to the type of camera) | |
| Interface I/O | LAN | 1(RJ-45) 10M / 100M Ethernet port |
| USB | One USB 2.0, can be used for mouse, USB stick | |
| RS485 | One RS485 port | |
| Serial | One RS232 port (For GPS) | |
| Network | WiFi(Optional) | Build in 802.11b/g/n AP, speed up to 300Mbps |
| Protocol | TCP/IP | |
| Communication(Optional) | build in 3G/4G(HSUPA/HSDPA/WCDMA/EVDO/TD-SCDMA/FDD-LTE/TDD-LTE) | |
| Alarm & Sensor | Inputs | 3 Alarm input, 1 ignition, 1 Panic button, G-Sensor |
| Outputs | 1 beeper, Alarm OSD | |
| Multi-mode | Activation by video loss, maximum permissible speed, Collision, stroage space, Video Motion, etc.. | |
| Power Supply | Ignition key | Recording starts when ignition is on, stops with delay time when ignition is off. |
| Power Consumption | Less 5.0W (No camera power consumption included) | |
| Power Input | 12VDC～32VDC | |
| Power Output | 11.5V/1.5A (10 channels) | |
| G-Sensor | G-Sensor | Support for three-axis motion detection |
| Physical Characters | Dimension | 162.3x133.0x30.2 mm |
| Weight | About 0.55kgs | |
| Others | Backup | By WiFi (300Mbps, Actual download speed up to 150Mbps) |
| Clock | Internal, permanent calendar, Time sync from GPS (if available) | |
| GPS | Support GPS/GLONASS/BEIDOU，recording location, speed, live tracking | |
| Function Dual Streaming | Two different bit stream for recording and live streaming via 4G/3G | |
| Self-protection | Protection against overload, short circuit and reverse polarity | |
| Reset | Option to return to factory default setting | |
| LED's | Indicates Power, RUN, Alarm, Media Access, Recording status, network and 3G/4G | |
| Method of writing and reading of data | Overwrite ON/OFF selectable | |
| Environment | Operating Temperature | -25 ～ 55°C |
| Relative humidity | 5%～93% | |
| Vibration resistance | < 3 Grms | |
| Resistance to mechanical shock | < 1200 Grms | |
| ACC | <4.5V | Ignition Off |
| >6.2V | Ignition On | |
| Embedded Software | Config. FPS per channel | allows (1~30fps) |
| ID records vehicle license plate | Support | |
| USB | Support | |
| Rename channels | Support | |
| Watermark | Includes date and time, latitude and longitude, vehicle speed, and vehicle ID plate and name or channel number | |
| Schedule | Settings hour, minute, 3 time plans per day | |
| Image Playback | Support play back, file listed by date and time, alarm | |
| Firmware Upgrade | Can use hard disk/USB disk/SD card/remote upgrade via 4G | |
| Playback Speed | Support from 1/32 to 32 | |
| Software | hPlayer | Player software, play multiple cameras together, can also play the encrypted file |
| CMSV6 | Used for 4G/3G model only, support live view/live tracking/historical track/remote upgrade etc | |
